Basic Info.
Automation
Semi-automatic
Transport Package
Wooden Case
Product Description
300L Big Tank Stainless Steel Industrail Ultrasonic Cleaner with CE, FCC, RoHS certification
Product Description
JYD-1072SG Industrial ultrasonic cleaner full digital operation, intelligent design, one-button degassing, power regulation, timing, heating and level
protection, filtration cycle, automatic lifting, and fault alarm functions, to provide customers with safer and more convenient cleaning services.
Main features:
1. Internal SUS304 tank, chrome coated on the thickness at least 2.0 mm vibration side. Inside argon welded by manual, outside by riveter to ensure the strength and durability of the tank.
2. Automatic frequency tracking generator, MCU-sweep drive, strong ultrasonic effect, uniform cleaning.
3.Industrial high-Q transducer, high-strength glue bonding, high conversion effect, and strong output.
Product Parameters
Customized Ultrasonic Cleaner Specification |
Model | Capacity (Liter) | Ultrasonic Frequency (kHz) | Ultrasonic Power(W) | Heating Power (W) | Transducers Qty (PCS) | Inner tank dimension (MM) |
JYD-1010SG | 36-42 | 25/28/40 | 500 | 1200 | 10 | 700*300*200 |
JYD-1012SG | 45 | 25/28/40 | 600 | 1500 | 12 | 500*300*300 |
JYD-1018SG | 61 | 25/28/40 | 900 | 2000 | 18 | 500*350*350 |
JYD-1024SG | 88 | 25/28/40 | 1200 | 3000 | 24 | 550*400*400 |
JYD-1030SG | 108 | 25/28/40 | 1500 | 3000 | 30 | 600*450*400 |
JYD-1036SG | 147 | 25/28/40 | 1800 | 6000 | 36 | 650*500*450 |
JYD-1042SG | 163 | 25/28/40 | 2000 | 6000 | 42 | 650*500*500 |
JYD-1048SG | 175 | 25/28/40 | 2400 | 6000 | 48 | 700*500*500 |
JYD-1060SG | 240 | 25/28/40 | 3000 | 9000 | 60 | 800*600*500 |
JYD-1072SG | 300 | 25/28/40 | 3600 | 9000 | 72 | 1000*600*500 |
Operation Instructions
Function Description: 1.Ultrasonic ON/OFF button The ultrasonic start/stop button, when this button is pressed, the ultrasonic generator starts to work and the working light on, pressing this button again, the ultrasonic stops working and the working light goes out.
2.Degas button Ultrasonic degassing button, press this button, the ultrasonic generator begins to enter the degassing working state, the Degas light on; press this button again, the degassing stops working, and the Degas light goes out. When degassing starts, power regulation is ineffective.
3.UP button Press this button, if in TEMP SET mode, set the heating temperature increase; if in TIME mode, the ultrasonic working time increases; if in GEN POWER mode, the ultrasonic power percentage increases. Press this key for three seconds to enter the setting of the number of communication generators. The address of the local control generator is A1-A6. For example, when set to A5, the controller can control the operation of 5 generators at the same time.
4.DOWN button Press this button, if in TEMP SET mode, set the heating temperature to decrease; if in TIME mode, the ultrasonic working time decreases; if in GEN POWER mode, the ultrasonic power percentage decreases.
5.HEAT ON/OFF button Wash tank heating start/stop button, press this button, the heating light is flashing, and the cleaning tank starts heating (When the water temperature in the cleaning tank is higher than or equal to the set temperature, the heating light is on steady, the cleaning tank is not heating); press this button again, the Heating lamp is off and the heating stops working.
6.GEN POWER button Press this button, the ultrasonic power percentage display light flashes, it enters the power percentage setting mode, and then press this key to log out of this mode. The percentage of power is 0-100%.
7.TIME button When this button is pressed, the time display light flashes and enters the time setting mode. Press this button for 3 seconds to enter the time-H setting (the default setting is the min setting), and then press this button to log out this mode. H mode time range 9H59MIN; MIN mode time range is 59MIN59S.
8.TEMP SET button Press this button, the temperature display light flashes, it enters the temperature setting mode, the flashing temperature value is the set temperature, press this button again, log out this mode, the temperature display light is on steady, during this time the digital tube displays the current actual temperature. In addition, when a communication failure alarm occurs, pressing this key will cancel the alarm. Set the temperature range 0-100 degrees.
9.ALARM light, When the communication between the control board and the ultrasonic generator fails, or the cleaner start heating/ultrasonic on without water in the tank, the alarm light flashes, and the buzzer sounds an alarm at the same time. The percentage of ultrasonic power display indicate an alarm fault code. The fault code is as follows:
| Fault code | Fault reason |
1 | AL-1 | Lack of water alarm |
2 | E-10 | Address 1 Generator Communication Failure |
3 | E-20 | Address2Generator Communication Failure |
4 | E-30 | Address 3 Generator Communication Failure |
5 | E-40 | Address 4Generator Communication Failure |
6 | E-50 | Address5 Generator Communication Failure |
7 | E-60 | Address 6 Generator Communication Failure |
Company Profile
Certifications
FAQ
1. Q. How do I get the best ultrasonic cleaning?
Choosing the proper cleaning solution is one of the most important decisions, as well as cleaning at the right temperature, cleaning time, and choosing the suitable size and type of ultrasonic cleaner.
2. Q. Can ultrasonic cleaning damage my parts?
Ultrasonic cleaning is considered, safe for most parts. Although the effects of thousands of air bubble implosions per second is very powerful, the cleaning process is safe since the energy is localized at the microscopic level.
3. Q: Why do I need to use a basket?
A: Basket would help to load objects together, and get a better cleaning effect.
4. Q: What frequency is better for my parts?
A: Frequency is suggested based on pollutants in the objects. 28kHz frequency is stronger, better for car/motor/truck/vessel parts clean(remove oils, grease, pastes, etc. ) 40kHz is better for PCB boards, electronic parts, etc. Higher precision goods, higher frequency.
5. Q: What about the warranty?
A: 1 Year warranty for all ultrasonic cleaner. If any technical problem during warranty time, replacement parts will be sent free of charge. And technical support is also available after 1 year.
6. Q: Are you a trading company or manufacturer?
A: We are a manufacturer.
7. Q: How long is your delivery time?
A: Standard products in great quantity 7 to10 days and generally 20-30 days for customer OEM products with large quantity.
8. Q: How about the terms of payment?
A: T/T, PayPal, Western Union, Money Gram, L/C, etc.
9. Q: Are you accept OEM orders?
A: Certainly, but we have quantity requirements, please feel free to contact our sales person for detail.
BACK TO HOME PAGE
Address:
10-7&10-8, Building 7, Hengdahuigu, Longhua District, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Service
Management System Certification:
ISO 9001, ISO 9000, ISO 14001, ISO 14000, ISO 20000, HSE
Company Introduction:
Shenzhen Jiayuanda Technology Co., Ltd is a leading national high-tech enterprise specialized in the ultrasonic technology research and development. The main products include desktop ultrasonic cleaner, desktop high frequency ultrasonic cleaner, desktop multi-frequency ultrasonic cleaner, digital household ultrasonic cleaner, industrial ultrasonic cleaner, full automatic medical ultrasonic cleaner. Ultrasonic generator, ultrasonic transducer, ultrasonic horn, ultrasonic cutter and other ultrasonic core accessories. Our products mainly applied in ultrasonic cleaning equipment, ultrasonic welding equipment, ultrasonic cutting equipment and other customized ultrasonic application. All of our products are CE/FCC/RoHS certificated.
Our company is committed to Insisting on the research, Meticulous in aspects from core component, product strategy to supplier management, JYD team has been pursuing superior quality, concentrating on creating easily-operated, maintanience convenient, price moderate and quality reliable products to deliver you a delightful product experience.
Development and production core technology independently. With"professional concept casing value"in mind
We adhere to the management principles of "quality first, customer first and credit-based" since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistible force